Key Features

• 2400W High-Output Power Station - Run fridges, power tools, coffee machines and appliances with confidence, even during surge starts
• Dedicated 2000W Pure Sine Inverter - Delivers stable, clean AC power for sensitive electronics and fixed 12V systems
• Flexible Use: Portable or Installed - Use the power station on the go, while the inverter supports sheds, caravans or vehicle-based setups
• Fast Charging & Solar Ready - Recharge in as fast as 1h via AC, or pair with solar using built-in MPPT for off-grid use
• Reliable LiFePO₄ Performance - Long-life battery technology with 4000+ cycles and advanced BMS protection
• Product 1: 2400W 2240Wh Power Station M2400
  • Battery Type: LiFePO₄ (3.2V × 50Ah × 14 cells)
  • Battery Capacity: 2240Wh
  • Output: 2400W rated / 4800W surge (Pure Sine Wave)
  • Life Cycles: 4000+
  • Management: MPPT Controller, BMS Protection
  • UPS Mode: Yes (under 20ms)
  • Bluetooth: Yes (App monitoring)
  • 4× AC Outlets (230V / 50Hz)
  • 2× DC Outputs (12V / 10A)
  • 2× USB-A Ports (12V / 1.5A / 18W)
  • 2× USB-C Ports (PD100W & PD45W)
  • 1× Car Cigarette Lighter Port (12V / 10A)
  • AC Input: 2000W Max
  • Solar Input: 2× XT60 (600W each, MPPT)
  • Car Input: Supported (via adapter)
  • AC Charging: 1.25 hours
  • Solar Charging: Varies by conditions
  • Car Charging: Dependent on vehicle & adapter
  • Certifications: CE, RoHS, UN38.3
  • Operating Temperature: -10°C to 40°C
  • Charging Temperature: 0°C to 40°C
  • Storage Temperature: -10°C to 45°C
• Product 2: VoltX 12V 2KW Pure Sine Wave Inverter
  • Rated Output Power: 2000W
  • Rated Output Power VA: 2000VA
  • Withstand Instantaneous Impact Power: 4000W
  • Rated Output Voltage: 220VAC/230VAC/240VAC(±3%)
  • Output Frequency: 50/60HZ(±0.2%)
  • Output Wave: Pure sine wave
  • Output Harmonic Component: THDV > 3% (pure resistance load)
  • Load Power Factor: 0.2-1 (load power ≤ output continuous power)
  • Rated Input Voltage: 12VDC
  • Input Voltage Range: 10.8~16.0VDC
  • Rated Output Efficiency: >92%
  • Maximum Output Efficiency: > 93.5% (30% overload)
  • Standby Current: <0.24A
  • No-load Current: <1.0A
  • USB Interface: Dual USB output, 5VDC/2A
  • ON/OFF/ECO Mode: ON - AC normal output OFF - no AC output, standby ECO - energy-saving mode, auto switch
  • ECO Starting Power: ＜30W
  • ECO Interval Time: 1min
  • TTL Interface: Non-isolated TTL communication, power supply 12.5V/200mA
  • Indicator: Green - normal operation; Red - fault
  • External Switch Contact Interface: Switch on or off by control equipment such as external relay and mechanical switch
  • Protection Function: Input over-voltage/over-discharge protection, output overload/short-circuit protection, and device over-temperature protection
  • Operating Ambient Temperature: -20℃~60℃
  • Storage Ambient Temperature: -35℃~80℃
  • Relative Humidity: ≤95%
  • IP Grade: IP20
  • Heat-dissipating Method: Natural heat dissipation + intelligent air cooling
  • Noise Level: ≤60dB

Note: The items in this bundle will be shipped separately, the packages may arrive at different times, please be patient and wait.

Important Safety Notice: This product is designed for general consumers and backup use only. It is not designed, tested, or certified for use with medical devices, life-support equipment, or other critical or safety-related applications. Do not use it as the sole or primary power source where continuous or uninterrupted operation is essential. For medical or other critical applications, use an appropriately certified backup power system.